Artificial Grass Fence for Privacy Screening & Site Enclosure

It is supplied as a flexible roll. Unroll it against an existing fence or frame, trim it to size, and secure it with zip ties or galvanized wire.

Yes. The artificial grass fence can be fixed directly over a chain-link fence or another suitable frame. This provides immediate privacy without removing the existing fence.

The wire mesh is hot-dip galvanized to resist rust and corrosion. For coastal, humid or highly dusty projects, confirm the coating specification and avoid cutting or damaging the galvanized layer during installation.

Yes. Height, roll length and colour can be specified, with roll widths from 1 m to 3 m. Adjacent rolls can be overlapped and joined to provide continuous coverage.

Available mesh openings are 40 × 40 mm, 45 × 45 mm and 50 × 50 mm. Under the standard specification, the approximate weights are 2.5 kg/m² for 40 × 40 mm, 2.2 kg/m² for 45 × 45 mm and 2.0 kg/m² for 50 × 50 mm. The final weight may vary slightly with wire diameter, coating and grass-strip density.

Roll width and length can be customized, so there is no single fixed weight per roll. Calculate the total weight as roll area × weight per square metre. Example only: a 2 m × 25 m roll covers 50 m² and weighs approximately 125 kg with 40 × 40 mm mesh, 110 kg with 45 × 45 mm mesh or 100 kg with 50 × 50 mm mesh.

Under the standard packing specification, approximately 8,500 m² can be loaded in a 40HQ container. The final quantity depends on roll height, roll length and packing requirements.

Yes. A mixed-product container can combine artificial grass fence rolls with artificial grass and artificial green wall panels in the same order. The final loading plan depends on roll and panel dimensions, total weight, carton size and whether you use a 20GP or 40HQ. Send the required quantities and specifications for a combined loading plan.

The selected outdoor PVC specification is suitable for hot climates where surface temperature remains below 70°C. For Gulf projects, request the UV and heat-resistance documentation for the exact product specification.

Selected specifications are suitable for use down to -45°C. During installation in extreme cold, avoid sharp bending and allow the roll to acclimatize before fixing it to the frame.

Use UV-resistant zip ties or galvanized wire to fix the roll to the fence or frame. Space the ties approximately every 20–30 cm, overlap adjacent rolls where required, and trim the edges after installation.

The MOQ is 200 m². Normal production takes approximately 3–7 days, depending on quantity and customization. Sample arrangements and the final dispatch date are confirmed after the colour, height and destination are specified.